instantaneous deformation
英 [ˌɪnstənˈteɪniəs ˌdiːfɔːˈmeɪʃn]
美 [ˌɪnstənˈteɪniəs ˌdiːfɔːrˈmeɪʃn]
n. 瞬时形变
双语例句
- The Strucure of 2024 Aluminum Alloy under Instantaneous Large-Current and Hot Deformation Behaviour
最大瞬时转速变化率瞬时大电流下2024铝合金组织变化及热变形行为 - The sequence of the relating degree between parameter A and others are B> D> C. The relation between instantaneous elastic and delayed elastic deformation is compact.
参数A和B、C和D关联度大小依次为B>D>C，该材料的瞬时弹性变形和延迟弹性变形之间联系紧密。 - The force of instantaneous steady seepage results in the vertical stretching of the foundation under geomembrane and the lateral compression, which make the foundation in the state of pure shear stress with small volumetric compressive deformation, thus, the foundation cannot be reinforced effectively.
瞬时稳定渗流体力使膜下地基竖向拉伸、侧向受压，接近纯剪切应力状态，体积压缩变形较小，难以有效地加固地基。 - An analytical solution of instantaneous and durable critical loads is obtained by solving the governing equations. The effect of transverse shearing deformation on the critical loads is also discussed.
第二种情况是不忽略横向剪切变形.通过求解控制方程得到了挠度随时间扩展的解析表达式，从而又得到了瞬时临界载荷和持久临界载荷，并讨论了横向剪切变形对临界载荷的影响。 - For both species, the resistant to instantaneous elastic deformation increases with the increase of loading.
结果是：马尾松、尾赤桉抗瞬间弹性变形能力随载荷的增加而增强； - The instantaneous resilience of the flame retardant acrylic yarn under repeated drawing was analyzed by testing its instantaneous elasticity. The relationship between the instantaneous resilience of the yarn and the shedding deformation along with its influence on weaving performance were discussed on a quantitative basis.
通过对阻燃腈纶纱的瞬时拉伸测试，分析重复拉伸条件下腈纶纱的瞬时回弹特性，定量地阐明腈纶纱瞬时拉伸回弹率与经纱开口变形的关系及其对织造加工的影响。 - The Instantaneous Deformation and Inertia Force of a Series of High Velocity Charpy Impact Test
高速Charpy冲击试验中的瞬态变形及惯性效应 - Using the finite element method on the space of the structural mesh and using the finite difference method on the time marching, the distributing field of instantaneous temperature and the instantaneous temperature deformation under the first kind boundary condition were worked out.
在构件网格空间上采用有限单元法，而在时间推进上采用有限差分法，求解出了高性能纤维（碳/芳纶纤维）混凝土在第一类边界条件下的瞬态温度场分布。 - Venant plastic substance. The elastic component and the non-linear viscous component of the improved Maxwell model can simulate the instantaneous elastic deformation and visco-plastic deformation respectively. The Kelvin model and St.
在五元件黏弹塑性模型中，改进Maxwell体中的弹性体和非线性黏性体分别模拟瞬时弹性变形和黏性流动变形，Kelvin体和St。 - Based on the on the spot data coming from settlement on the soft soil foundation, a modified hyperbola consolidation model including instantaneous deformation under successive load is built, which fits either the once loading or the successive loading.
在现场软土地基沉降观测资料的基础上，建立了软土地基逐级加荷，条件下考虑瞬时变形的修正双曲线固结计算模型。 - During sharply instantaneous change of temperature of the liner, there is a delay of temperature rise in the structure, and then the compressive plastic deformation at the local high temperature zones is engendered by thermal shock loading.
在火焰筒温度急剧变化过程中，结构上存在温升滞后现象，热冲击载荷造成局部高温区压缩塑性变形； - The instantaneous elastic, delayed elastic, and viscous deformation increase with stress level.
瞬间弹性变形和延迟弹性变形均随着应力水平的加大而加大； - The result shows that the dynamic yielding strength of metal is 1~ 1000 times higher than its static yielding strength during the course of high pressure high velocity and instantaneous plastic deformation.
结果指出，在此高压、高速和瞬时的塑性变形过程中，金属的动态屈服强度值比其静态下的屈服强度值高出1～3个数量级。 - Instantaneous plastic deformation decreasing also as the density increases, and the "turning point" of the curve of plastic deformation vs. compressive stress which is of special importance in the thickness tolerance control of the overlaid particleboard moving along the increasing direction of stress with the density;
瞬间塑性变形随密度的提高而降低，并且，对贴面刨花板厚度控制具特殊意义的塑性变形&压缩应力关系曲线的第一个转折点随密度的提高而向应力增大方向移动； - The Consolidation Model Including Instantaneous Deformation Under the Successive Load
逐级加荷条件下考虑瞬时变形的固结模型 - Through analyzing the instantaneous distribution of the yield function, bending moment and axial force during early time response, the elastic-plastic deformation mechanism and the influence of axial component of oblique impact on the dynamical response of cantilever beam are discussed.
通过对屈服函数以及弯矩、轴力在动力响应过程中分布规律的分析，阐明了斜撞击下悬臂梁的弹塑性动力响应模式和斜撞击的轴向分量对变形机制的影响。 - Through analyzing the instantaneous ( distribution) of the bending moment during the course of dynamic response, the elastic effects on the deformation ( mechanism) of the curved cantilever beam were discussed meticulously.
通过对响应各时刻弯矩分布规律的细致分析，阐明悬臂曲梁动力响应过程中，弹性效应对变形机制和响应模式的重要影响。 - Because of high centralized instantaneous heat input, a great deal of residual stress and deformation should be brought in the process of the welding, which can heavily influence the capability of welding structure.
由于高度集中的瞬时热输入，在焊接过程中和焊后将产生相当大的残余应力和变形。 - Measurement of Instantaneous Deformation of a Model by Geometric Moire Method
应用几何云纹法测量模型的瞬态变形 - The concrete will produces instantaneous elastic deformation under loading on the concrete member. Even if the loading does not increases, the concrete will still produces creep deformation.
当荷载作用在混凝土构件上后，混凝土会产生瞬时的弹性变形，即使荷载不再继续增加，混凝土仍然会发生徐变变形。 - Established based on the elasto-viscoplastic mechanical model, its the Laplace hair Laplace calculated the instantaneous elastic, viscous flow and delayed elastic deformation of the soft amount.
建立了基于粘弹塑性力学模型，对其拉普拉斯和反拉普拉斯计算得到瞬时弹性、粘性流动和延迟弹性变形柔量。 - Heat source model is important to the calculation accuracy of instantaneous temperature field and the stress and deformation in the welding process of numerical simulation.
数值模拟焊接过程中，热源模型是否适当对瞬间焊接温度场以及应力变形的计算精度有很大影响。 - The hull structure is a typical welded structure. The welding is a extremely process of the high temperature, the dynamic state and the instantaneous state. and also produce the welding stress and deformation.
船体结构属于一种典型的焊接结构，而焊接则是个极其复杂的高温、动态、瞬时过程，船体结构在焊接过程中不可避免地会产生焊接应力和变形。